 |
|
|
Software
|
| |
Software |
| Number of projects |
64 (serially addressed via CF memory card: 99) |
| Position correction |
Max. 99 per project using pattern/contour matching (360 °), feature extraction, edge finder |
| Checking functions |
99 per project
Functions: Grey value window, presence checks, edge finder (grey value, binary), pattern matching, contour matching, smart matching, defect detection (surfaces and edges), feature extraction |
| Calculation menu |
96 registers per project Basic calculations, roots, sinus, cosinus, arc tangent, distance between two points, abs, bracket functions |
| Evaluation |
96 registers per project
AND, OR, NOT, XOR, bracket function |
| Statistics |
96 registers per project
Number of measurements/OK/NG parts, average value, scatter, min/max values |
| User-defined screen |
50 entries per project
Display of project number, measured values, OK/NG values, direct limit value input |
| Image memory |
Max. 16 images/camera
Operating modes: Continuous storage, equation-based NG image storage, display of last error screen
Storage in real time without time lag and with storage date, additional image storage on CF card |
| Others |
Password protection, real time clock, comprehensive settings assistants, measured value/image output on CF card |
|
|
|
|
Hardware - controller
|
| |
Controller |
| Resolution |
512 x 480 pixels |
|
Interfaces |
|
| Serial |
RS232C; 115.200 bps |
| Parallel inputs |
13 inputs, points, opto-decoupled, bipolar (NPN, PNP) |
| Parallel outputs |
14 outputs, points, opto-decoupled, bipolar (NPN, PNP) |
| Ethernet |
100Base-Tx, 10Base-T for project management software AXTOOL |
| CompactFlashT |
memory card; Type I; max. 512MB; for storage of project data, images, screenshots, system settings, etc. |
| |
|
| Number of cameras |
max. 2 |
| Display |
2 (up to 4 with camera switching unit ANPV3700, excluding finger cameras) |
| Visualization |
1 color VGA output |
| Supply voltage |
24V DC |
| Current |
< 0.9A |
| Operating temperature |
0-50°C (no icing, no condensation) |
| Weight |
Approx. 450g |
|
|
|
|
Hardware - cameras
|
| |
Double-speed camera ANM831 |
Standard camera ANM832 |
| Image recording |
1/3" CCD-Chip, 659x494 pixels, square pixels |
1/3" CCD-Chip, 768x494 pixels |
| Imaging time |
1/120 to 1/20,000s (dependent on controller) |
1/30 to 1/10,000s (dependent on controller) |
| Connection |
12 V=/130 mA (via controller) |
12 V=/140 mA (via controller) |
| Lens connection |
C-mount |
CS-mount |
| Vibration resistance |
70 m/s2 (10 to 55Hz, one sweep/min, 30 min in X, Y, Z directions) |
10 to 55 Hz, one sweep/min, oscillation amplitude 1.2 mm, 30 minutes each in X, Y and Z directions |
| Temperature |
0° C to +40° C (operation) |
0° C to +40° C (operation) |
| Moisture |
30 % to 70 % r.h. (operation) |
35 % to 85 % r.h. (operation) |
| Weight |
Approx. 70 g (without base, cable) |
Approx. 450 g (with cable) |
|
|
|
|
Hardware - camera switching unit
|
| |
Camera switching unit ANPV3700 |
Function 1:
Camera switching |
Switches one of the two camera inputs to the output by switching via an external signal or fixed via a DIP switch. |
Function 2:
Image splitting |
Combines upper/lower or left/right halves of both input cameras into one image (only with ANM832 camera). |
| Connections |
2x camera input
1x camera output
1x switching signal |
| Power supply |
12 V= (via PV310 controller) |
| Weight |
Approx. 150 g (without cable) |
|
|
Ionizers
Products
