 |
|
|
Software
|
| | Software | | Modes of evaluation | Grey-scale image, colour image, contour image (max. 2 modes, depending on the number of cameras) | | Number of projects | 16 | | Positional adjustment | Max. 99 per project by means of pattern / contour matching (360°), feature extraction, edge finding | | Surface area determination | Max. 99 per project
Output: number of pixels
Shape: rectangle, polygon, ellipse, maskable | | Scanning | Max. 99 each, grey-scale and binary edge findings per project
Output: edge position
Shape: rectangle, line | | Feature extraction | Max. 99 per project to determine surface area, centre of mass, angle, circumference, describing rectangle and number of objects
Shape: rectangle, polygon, ellipse, maskable | | Grey-scale pattern matching | Max. 99 per project
Output: centre of mass, angle, correlation
and number of deviating pixels
Shape: rectangle, Mask: rectangle, polygon, ellipse | | Contour pattern matching | Max. 2 per project
Output: centre of mass, angle and correlation
Shape: rectangle | | Computational menu | 99 registers per project
Basic calculations, square root, sine, cosine, arc tangent, distance between 2 points, abs, brackets | | Evaluation | 99 registers per project
AND, OR, NOT, XOR, brackets | | Statistics | 16 registers per project
Determining the number of measurements/OK/NG (Not Good) parts, average value, spread, min/max value, absolute range | | User-defined screen | 50 entries per project
Displays the project number, measured values, OK/NG values, direct limit specification | | Image storage | Max. 16 images/camera
Modes of operation: continuous storage, formula-based NG-image storage, display of last error image
Saved in real-time without time-delay, with date of saving indicated | | Miscellaneous | Password protection, real-time clock, extensive setup support, measured value output to CF card |
|
|
|
|
Hardware
|
| |
Main unit |
| Resolution |
512 x 480 pixels |
| Colour processing |
2 x 8 colours |
|
Interfaces |
|
| Serial |
COM port: RS232C (max. speed 115,200 bps) |
| Parallel input |
13-point input, 12 to 24V DC bi-directional input (NPN/PNP)
photo-coupler |
| Parallel output |
14-point output, 12 to 24VDC photo-coupler output (NPN/PNP) |
| Ethernet |
100Base-Tx, 10Base-T for project management software AXTOOL |
| CompactFlashT |
Memory card; type I; max. 512MB
saves project data, images, screen shots,
system configurations, etc. |
| |
|
| No. of cameras connectable |
Max. 2 |
| Visualisation |
1-colour VGA connection |
| Rated voltage |
24V DC |
| Rated current consumption |
< 0.9A |
| Operating temperature range |
0 to 50°C (no frosting or condensation) |
| Weight |
Approx. 450g |
| |
Camera |
| CCD sensor |
1/3" CCD sensor, 659 x 494 square pixels |
| Lens mount |
C mount |
| Scanning times |
1/30s, 1/100s,1/250s, 1/500s, 1/1,000s, 1/2,000s, 1/4,000s, 1/10,000s |
| Rated voltage/current consumption |
12V DC / 0.13A supplied from controller |
| Operating temperature: |
Guaranteed performance range 0 to 40°C
Allowed operating temperature range: 0 to 50°C
(no frosting, no condensation) |
| Vibration resistance |
10 to 55Hz; 1 sweep/min.; vibration width 1.2mm; 30 min. each in X,Y,Z directions |
| Shock resistance |
196m/s2; 3 times each in X, Y, Z directions |
| Weight |
Approx. 70g (excluding camera cable, lens and
camera mounting brackets) |
|
|
Ionizers
Products
