 |
|
|
Pulse Air-Gun Ionizer
|
With the new pulse air-gun ionizer from SUNX, operators can comfortably neutralize static electricity while manually cleaning. The pulse air-gun's light-weight, ergonomic design combined with an oil- and heat-resistant 2m cable makes it ideal for flexible use at the production line.
A white LED on the front of the gun illuminates target objects.
You can switch between long pulse, short pulse and continuous air emission modes. Ionized air can be emitted at high pressure (range 0.5 to 5bar), neutralizing static charges and removing dust simultaneously and swiftly. Characteristics: - Charge removal time of 0.5s 1
- Light-weight, ergonomic design for operator comfort
- High emission pressure (range 0.5 - 5bar), maximizing cleaning speed
- Oil and heat-resistant 2m cable
- Three ionized air emission modes: long pulse, short pulse, continuous
- White LED for illuminating target object
|
|
|
| Specifications | | Model no. | EC-G01 | | Charge removal time | Approx. 0.5s (1,000 V -> 100 V)1 | | Applicable fluid | Air (dried clean air by filter) | | Supplied air flow | Max. 300 l/min. | | Air pressure range | 0.5 to 5bar | | Power supply voltage | Accessory AC adapter:
INPUT: 100 to 240V AC +/-10% 50/60 Hz
OUTPUT: 24V DC | | Power consumption | 30VA or less | | Discharge method | High-frequency AC method | | Air emission modes | Long pulse, short pulse, continuous
Selectable by switch | | LED illumination mode | ON (always ON) / SYNC (synchronized with trigger) / OFF (always OFF) | | Weight | 270g approx. (main unit only) | 1) Typical value for pulse air mode: continuous at 100mm from the front of discharge nozzle at an applied air pressure of 5bar
|
|
|
|
|
Typical applications
|
Charge removing and cleaning on PCB
|
Charge removing and cleaning on FPD
|
Dust removal before painting
|
|
|
Company
Ionizers
